Audi A1 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,229 Posts
Discussion Starter · #1 ·
Removing and installing bumper cover (rear)
1 - Bolt
- 2 Nm

2 - Cover

3 - Bolt
- Tightening torque (1.5Nm)

4 - Bolt
- Tightening torque (1.5 Nm)

5 - Nut
- 5 Nm

6 - Bumper cover
- If fitted, unplug electrical connector at parking aid control unit -J446-.
- Prise out cover -2-.
- Remove bolts -1-, -3- and -4-.
- Remove nuts -5- from inside, bend open side sections at side over guide and detach cover from vehicle towards rear.

7 - Expanding nut
 

Attachments

·
Registered
Joined
·
1,229 Posts
Discussion Starter · #2 ·
Unclipping side sections of bumper cover

1 - Bumper cover
- When removing, cover must first be pulled out to the side over guide.
- When installing, make sure that retaining hooks engage completely in guide -arrows-.

2 - Bolt
- Tightening torque (1.5Nm)

3 - Guide

4 - Wheel housing liner
 

Attachments

1 - 2 of 2 Posts
Top