Retro fitting xenon Audi a1 Sportback

Retro fitting xenon Audi a1 Sportback

Postby AudiA18xa » Sat Oct 15, 2016 8:33 am

Retro fitting audi a1 xenon
Where shall the wiring goes from the adapter cabels to the BCM/control box, i Cant find Any where to but them in so the high beam Will work

Sendt fra min SM-G935F med Tapatalk
AudiA18xa
A1F Newbee
 
Posts: 3
Joined: Sat Oct 15, 2016 8:10 am

Advertisement

Re: Retro fitting xenon Audi a1 Sportback

Postby kyriazog » Wed May 10, 2017 12:15 am

I guess it is too late, but I should reply. The bcm which is located on the driver side near the relay place, has 3 connectors. You have to connect those two wires, on one of the connectors. I think it was the middle one, in places 48 and 49. You should find a copy of elsawin, and the info is in there. I will be doing this retrofit in aproxx. 3 months when my car arrives.
kyriazog
A1F Major Contributor
 
Posts: 152
Joined: Mon Mar 03, 2014 7:00 pm


Return to Audi A1 How Too's

Who is online

Users browsing this forum: No registered users and 25 guests