Steering Weight adjust with VCDS

Steering Weight adjust with VCDS

Postby coupeman » Sun Jan 17, 2016 3:58 pm

Ok, just carried this out and it makes the somewhat light A1 steering a lot more acceptable. Changed it to GTi which is 20. In the module 44 then coding, there is a 5 digit number, if its never been touched it should read 11251. To adjust it to another parameter, there is a list on here somewhere, just change the last two digits, so GTi is 11220

I found that this needed to be done with just the ignition on, not with the engine running as it wont stick.

Makes a big difference!
140 CoD Sport with DTUK Box (170ish) 3 door
Xenons, BOSE, Advanced Key, Hill Hold, High Beam Assist, Black roof lining, LED Pack, Comfort Pack, Storage Pack, Heated Seats, Tech Pack, Dark Glass.
Amalfi White with Daytona Roof. 17" Alloys, 10mm spacers all round.
Quattro Alloy Gear Stick. Centre console in Mono Pur, S1 Window and Mirror switches.
VCDS Mods. 5 indicator, Rear LED DRLS, Passenger Mirror Tilt, Beep on Lock/Unlock, Needle Sweep, Rear parking sensor display. Full led conversion for all lights, front and rear indicators and reversing lights, plus glove box.
coupeman
A1F Major Contributor
 
Posts: 318
Joined: Wed Jul 23, 2014 7:55 pm

Advertisement

Re: Steering Weight adjust with VCDS

Postby kyriazog » Sat Oct 07, 2017 5:27 pm

Hello, I am trying to perform this change with vcds but I have stuck. Did you do this on a facelift model? My code looks like this:

Code: Select all
Address 44: Steering Assist (J792)       Labels:| 6Rx-909-144-V2.clb
   Part No SW: 6R1 909 144 AN    HW: 6R1 909 144 E
   Component: EPS_TRW_ALow  313 3150 
   Serial number: CH5Q0434
   Coding: 800700
   Shop #: WSC 00046 412 00000
   ASAM Dataset: EV_SteerAssisUDSTRW 016134
   ROD: EV_SteerAssisUDSTRW.rod
   VCID: 03527E50CB929C7F468-8056

No fault code found.


and I can't find this 11251 that you state. I have although tried, through adaptation, to change steering assist from 100% to 60%, but after some time( if I turn off the engine and on it doesn't change) it reverts back to 100%. I should also note that I have factory Audi Drive Select. Any ideas?
kyriazog
A1F Major Contributor
 
Posts: 152
Joined: Mon Mar 03, 2014 7:00 pm


Return to Audi A1 How Too's

Who is online

Users browsing this forum: No registered users and 16 guests

cron